«EasyCeiling LaserHelper» Server program interface
The program controls the laser projector: it loads an order, shows the contour, and projects it onto the table.
On a given site some buttons are hidden by rights or mode.
Day-to-day work: How to work with the laser projector
Card fields: Projector card
Calibration: Laser projector calibration
Items marked (adv.) appear in advanced mode. (dev.) is for a technician or service.
Main window

Element | Purpose |
Current projector | Active projector that receives commands and the projection |
On / Off status | Shows whether the projector is linked |
Save icon next to the projector | Remember the selected projector as the default |
Red cutting-side caption | Face or reverse side of the fabric |
Chart area | Contour preview; in calibration — drag points |
Log | Events, errors, temperature |
Clear Log / Save Log | Clear on screen or save to a file for support |
Status | Projector temperature |
Perimeter | Perimeter of the current contour |
Tabs: Operating mode (scanner, pause, frequency), Calibration mode (steps 1–3), Settings (projectors, reports, advanced mode).
Operating mode
Element | Purpose |
Barcode scanner | Open the order barcode window |
Send calibration | Send calibration parameters to the projector |
Pause | Turn the beam off temporarily |
Reconnect (adv.) | Re-establish the link with all projectors |
Decrease / increase frequency | Change scan rate |
Width / Length | Table size from the projector card |
Start/End X, Y | Working area bounds |
Whole area | Reset the working area to the full table |
Zoom | Scale the drawing on screen, not on the table |
Do not change PSC / ARR / RCR or speed parameters without a specialist’s instruction.
Calibration mode

Technician order: Step 1 Trapezoid → Step 2 Center → Step 3 Table → Save settings. Enable Auto-send changes and watch the table, not the monitor.
Calibration save password: admin / 123456789 (once per session).
Settings

Password for work with files and advanced mode: admin / 12345.


Projector list and card


Full field reference: Projector card.
13. Enable mirror correction — software correction of distortion caused by mirror geometry

Projection without mirror correction

Projection with mirror correction
Tray menu and access levels
From the tray icon: save settings, Windows startup, connect/disconnect projector and scanner, send calibration, frequency, pause, open window, exit.
Who | What to use |
Operator | Current projector, scanner, pause, frequency, scale, manual order send, log |
Technician | Calibration steps 1–3, points table, projector card, UART/Wi‑Fi, advanced mode |
Developer / service | PSC/ARR/RCR, original image, clipboard, diagnostics, mirrors |