Power supply for an LED strip
Prepared from materials of Euroformat.
Power-supply wattage comes from the strip's power per meter, the run length, and a reserve. The reserve is different for 12 V and 24 V. Take the next larger supply: do not use a unit that is equal to or below the calculated load.
Place the strip on the drawing as described in Building light lines and tracks. Controller current is in Controller and dimmer calculation.
12 V strip
Power, W/m × length, m × 1.3 = supply power, W
The reserve is 30%.
Example: a 16 W/m strip, 10 m long.
16 × 10 = 160 W; with a 30% reserve, 160 × 1.3 = 208 W.
A 12 V, 200 W supply is below this load. Use a 12 V, 250 W supply.
24 V strip
Power, W/m × length, m × 1.2 = supply power, W
The reserve is 20%.
Example: a 10 W/m strip, 10 m long.
10 × 10 = 100 W; with a 20% reserve, 100 × 1.2 = 120 W.
The next larger supply given for this example is 24 V, 150 W.