For Client

What is included in the printed form

This is a standard form that is sent to the client. It contains information such as:

  1. Order number and ceiling number

  2. Ceiling creation date

  3. Manufacturer data

  4. Client data

  5. Material and harpoon that were used in this ceiling

  6. List with side lengths and diagonals.

    This list can be hidden or shown by checking this item:

  7. Direction of seams, if any

  8. Area and perimeter

  9. Length of seams, if any

  10. Number of corners of this ceiling

  11. Ceiling drawing

  12. Tolerance, if any

To configure how the "For Client" print form will look, we need to open the program settings and go to the "Print" tab and open "Print Templates". Now let's go through each setting in order.

  1. Print form type - here you select the print form for which the settings below will be applied. The dropdown list contains all print forms, both from the "Print" tab and from the "Calculation" tab.

  2. Barcode data - in this setting you can choose what data the barcode located on the print will contain.

    There are two data settings for barcodes:

    1. Order number

    2. Invoice barcode

  3. Display barcode - a setting that turns on and off the display of barcodes and QR codes on print forms.

    See example

    Setting enabled

    Setting disabled

  4. Display calculation table for client - a setting that allows you to display on the print form a table from the "For Client" calculation.

    See example

    Calculation For Client

    Setting enabled

    Setting disabled

  5. Display Special notes - displays Special notes on the print form.

    See example

    Setting enabled

    Setting disabled

  6. Display order author - Displays on the print form the data of who created the order.

    For this setting, you must have authorization enabled in the program.

  7. Display dealer note - Displays on the print form a note that is specified in the dealer card.

    See example

    Dealer card

    Print form

    Setting disabled

  8. Title (printed in the upper right corner) - title for your print form that will be displayed in the upper right corner.

    See example

    Setting

    Print form

  9. Template (printed at the end of the sheet) - template where you can write any data and it will be displayed on the print form.

    See example

    Setting

    Print form

What questions does this article answer?

This article will help you find answers to the following questions:

  • How do I set up a printed form for a customer in EasyCeiling?

  • What is included in the standard printed form for the customer?

  • How do I enable or disable barcodes on the letterhead?

  • How do I add a calculation table to a printed form?

  • How can I put special marks on the form for the client?

  • How do I set up the display of the author of the print order?

  • How do I add a dealer's note to the printed form?

  • How do I change the name of the form in the upper-right corner?

  • How do I add a template to the end of a printed sheet?

  • What data does the form for the client contain?

  • How can I hide or show a list of side lengths on a print?

  • How do I set up the display of QR codes on the forms?

  • How can I print the manufacturer's data?

  • How do I set up the display of the material and the harpoon on the form?

  • How do I add a ceiling drawing to a printed form?

  • How can I display the area and perimeter on the form for the client?

  • How do I set up the seam direction display on the print?

  • How can I display the number of ceiling angles on the form?

  • How do I add an error to the printed form?

  • How do I set up the barcode data for the client's form?