For Client ART

What is included in the printed form

This is a standard form with photoprinting information that is sent to the client. It contains information such as:

  1. Order number and ceiling number

  2. Ceiling creation date

  3. Manufacturer/dealer data

  4. Client data

  5. Material and harpoon that were used in this ceiling

  6. ART printing information

  7. Direction and length of seams, if any

  8. Area and perimeter

  9. Apply cut length

  10. Number of corners of this ceiling

  11. Ceiling drawing

  12. Tolerance, if any

To configure how the "For Client ART" print form will look, we need to open the program settings and go to the "Print" tab and open "Print Templates" and specify the print form type "For Client ART".

Now let's go through each setting in order.

  1. Print form type - here you select the print form for which the settings below will be applied. The dropdown list contains all print forms, both from the "Print" tab and from the "Calculation" tab.

  2. Barcode data - in this setting you can choose what data the barcode located on the print will contain.

    There are two data settings for barcodes:

    1. Order number

    2. Invoice barcode

  3. Display barcode - a setting that turns on and off the display of barcodes and QR codes on print forms.

    See example

    Setting enabled

    Setting disabled

  4. Display Special notes - displays Special notes on the print form.

    See example

    Setting enabled

    Setting disabled

  5. Display order author - Displays on the print form the data of who created the order.

    For this setting, you must have authorization enabled in the program.

  6. Title (printed in the upper right corner) - title for your print form that will be displayed in the upper right corner.

    See example

    Setting

    Print form

  7. Template (printed at the end of the sheet) - template where you can write any data and it will be displayed on the print form.

    See example

    Setting

    Print form