For Producer Cutting

This is a standard production form for cutting.

What is included in the printed form

  1. It contains information about the dealer, client, material, all dimensions and point data in the form of a table or in a row.

    Film consumption - is the area of the ceiling + trimming.

    See the example

    The drawing on the form is always positioned with seams from top to bottom.

    The order of displaying points in the table is set in the settings, in the coordinate sorting method and zero point location sections.

  2. You can enable and disable the display of sides with shrinkage.

    See example

    How to enable the setting?

    Setting enabled

    Setting disabled

  3. You can also make the coordinate table print on the same form along with the drawing.

    See example

    How to enable the setting?

    Setting enabled

    Setting disabled

For a detailed description of the print settings themselves, you can find it in our article.

To configure how the "For Producer Cutting" print form will look, we need to open the program settings and go to the "Print" tab. Open "Print Templates" and select the print form type "For Producer Cutting".

Now let's go through each setting in order.

  1. Print form type - here you select the print form for which the settings below will be applied. The dropdown list contains all print forms, both from the "Print" tab and from the "Calculation" tab.

  2. Barcode data - in this setting you can choose what data the barcode located on the print will contain.

    There are two data settings for barcodes:

    1. Order number

    2. Invoice barcode

  3. Display barcode - a setting that turns on and off the display of barcodes and QR codes on print forms.

    See example

    The setting applies to all sheets of the print form. If you have 2 sheets on the form, the barcode will be displayed on both the first and second sheets.

    Setting enabled

    Setting disabled

  4. Display Special notes - displays Special notes on the print form.

    See example

    Setting enabled

    Setting disabled

  5. Display order author - Displays on the print form the data of who created the order.

    For this setting, you must have authorization enabled in the program.

  6. Display dealer note - Displays on the print form a note that is specified in the dealer card.

    See example

    Dealer card

    Print form

    Setting disabled

  7. Title (printed in the upper right corner) - title for your print form that will be displayed in the upper right corner.

    See example

    Setting

    Print form

  8. Template (printed at the end of the sheet) - template where you can write any data and it will be displayed on the print form.

    See example

    Setting

    Print form

    The template will only print on the first sheet of the form, where the coordinate table is located, this template will not be visible.

Video: YouTube, RuTube

What questions does this article answer?

  • How is a standard cutting form generated?

  • What information is contained in the cutting form?

  • How is the drawing positioned on the form?

  • How to configure the order of displaying points?

  • How to set the coordinate sorting method?

  • How to set the zero point location?

  • How to organize the cutting process?

  • How to control cutting quality?

  • How to keep track of materials?

  • How to check the correctness of drawings?

  • How to optimize material consumption?

  • How to control compliance with requirements?

  • How to organize form storage?

  • How to automate the cutting process?

  • How to account for the specifics of different ceiling types?

  • How to control product quality?

  • How to check calculation accuracy?

  • How to optimize the production process?

  • How to organize order notifications?

  • How to track information about clients and dealers?