Measuring a mansard ceiling
Prepared from materials of Euroformat.
A mansard is measured in two ways. Do not mix the walk direction of one way with the projection plane of the other: that decides whether the cut mirrors the drawing.
Method 1. Projection onto the ceiling
Walk counterclockwise and take the dimensions from the mansard surface itself.
On figure 1 the arrows follow the slopes. On figure 2 that contour is laid flat and recorded like an ordinary drawing: sides and diagonals of closed triangles.

In the program this is a face measurement, not a projection onto the floor:
On the PC, press Wall measurement in construction through sides and diagonals so the cut does not mirror the drawing.
In the mobile app, set the ceiling measurement type to Wall / mansard. How the type affects the cut is described in Working with an order.
Method 2. Projection onto the floor
Walk clockwise. Project the mansard onto the floor and look at the plan from above.

In the program this is an ordinary ceiling: do not press Wall measurement, and in the mobile app leave the type as Ordinary ceiling. The cut will mirror the drawing.