Value Types in Cost Calculation for Automatic Calculation
Creating and Editing a Service in Cost Calculation
Unit of Measurement "%"
Used, for example, in combination with the value type "Discount" if you want to make a percentage discount. Or you can do the opposite - create a service with a markup.
Price field (No price lists) - markup/discount value.
When adding a service with % unit (if value type is not set) the service will work as a markup.
The markup is applied to all services that are listed above it.
Attention! The value types below are not in the same order as they appear in the program. Here they are grouped by values.
Not Set. Do not apply any value to the current service
Area
When there are multiple textures in the ceiling, displays each as a separate line
1. Room Area with Waste (sq.m)
Displays the room area adding waste, the texture name is shown in the title. Waste Settings (YouTube Video)
2. Ceiling Area (without service name replacement) (sq.m)
Displays the room area adding waste, the service name is shown in the title.
3. Room Area (actual) (sq.m)
Displays the actual room area, even if waste is configured.
4. Paid Waste (sq.m)
Displays the configured waste area.
Photo Printing
Photo Printing (satin/matte) (sq.m) Area of the rectangle containing the photo print for satin/matte films
Photo Printing (lacquer) (sq.m) Area of the rectangle containing the photo print for lacquer films
UV Printing (sq.m) Area of the rectangle containing the photo print using UV method
ECO Printing (sq.m) Area of the rectangle containing the photo print using ECO method
UV Printing with White (sq.m) Area of the rectangle containing the photo print using UV Printing with White method
Double-sided Photo Printing Displays the presence of double-sided photo printing (Example: Double Vision / 1 / pcs / price 300)
Perimeter
Room Perimeter (m) Actual room perimeter
Profile by Perimeter (m) Perimeter rounded up to the nearest multiple of baguette length
Seams
Seam Centering (%) If the seam is not pulled to the edge, adds the specified percentage to the cost (Example: Seam Centering / 10 / % / price increases by 10%)
Length of Straight Seams (m) Displays the length of straight seams (Example: Canvas Welding / 3.4 / m / price 100 / total 340)
Length of Curved Seams (m) Displays the length of curved seams. Available in the "Multi-texture" add-on module
Multi-texture
Color Combination Displays the presence of multiple textures (colors) in the ceiling (Example: Different Film Welding / 1 / - / price 100 / total 100)
Multi-texture - canvas welding (sq.m) Area of the welded section. Available in the "Multi-texture" add-on module
Additional Forms
Level Transition (total) (m) Length of level transition
Level Transition (Straight) (m) Length of straight level transition
Level Transition (Curved) (m) Length of curved level transition
Chandelier Installation (pcs) Displays the number of chandeliers placed on the drawing
Light Fixtures (pcs) Displays the number of light fixtures placed on the drawing
Pipe Enclosure (pcs) Displays the number of pipe enclosures placed on the drawing
Curved Section (m) Displays the length of the curved section. Curved Section Calculation Settings
Internal Cutout (m) Perimeter of the internal cutout figure
Perimeter of Straight Cutout (m) Perimeter of straight lines of the internal cutout figure
Perimeter of Curved Cutout (m) Perimeter of curved lines of the internal cutout figure
Corner Processing for Internal Cutout (pcs) Number of corners (points) in the internal cutout
Special Cutting (pcs) Number of corners (points) inside the side specified as special cutting
Structures
Structure (straight) (m) Length of straight structures (available in the "Structures" add-on module)
Structure (curved) (m) Length of curved structures (available in the "Structures" add-on module)
Cost
Discount (%) Discount percentage is recorded in the cost. When applying a discount service, a separate discount column appears in the cost calculation table. Applied only to services and products that allow discount application.
Client Prepayment The prepayment amount is always set manually and entered in the prepayment field below the table. For those who don't use the cash register!
Minimum Cost In EasyCeiling, you can set a minimum ceiling cost that will be automatically applied when calculating an order if the actual amount is below the set threshold. To do this, create a service with the value type "Minimum Cost" in the additional services directory and specify a fixed amount - for example, 500 ₽. When calculating, if the final ceiling cost is less than this value, the system will automatically add the difference, bringing the price up to the minimum. This is especially convenient for small rooms (up to 1 m²), allowing you to guarantee minimum income for any order volume.
Other
Corner Processing (pcs) Displays the configured number of corners
Light Lines
Straight Light Line (m) Length of straight light lines
Curved Light Line (m) Length of curved light lines
What questions does this article answer?
What are the different value types in EasyCeiling cost calculation?
How to use percentage-based calculations in cost calculation?
How to handle area-based calculations for different textures?
What are the photo printing value types and their differences?
How to calculate perimeter-based services?
How to work with seam calculations and centering?
What are the multi-texture calculation options?
How to handle additional forms and structures in calculations?
How to set up and apply discounts in cost calculation?
What is the minimum cost feature and how to use it?
How to calculate light line measurements?
What are the different units of measurement available?
How to handle curved sections and cutouts in calculations?
What are the best practices for automatic cost calculation?